Garnet 30/60 Blast Media 25kg

Price: £32.40
Ex Tax: £27.00
Product Code: CG507
Availability: 2

DENSE, HARD, LOW DUST BLAST MEDIA, SUITABLE FOR USE IN BLAST CABINETS, BLAST ROOMS, AND OPEN BLASTING. 100% NATURAL, AND VERY EFFICIENT.

HARDER AND HEAVIER THAN MINERAL SLAG ABRASIVES, SAND, AND CRUSHED GLASS, WHICH OFTEN RESULTS IN A SUPERIOR CLEANING RATE OF UP TO TWICE THE SQ. MTRS. PER HOUR.

NB. ALL GARNET IS NOT THE SAME : WE ONLY SUPPLY ALMANDITE FULL CRYSTAL GARNETS AS THEY YIELD LOWER DUST LEVELS AND FASTER CUTTING SPEEDS THAN THE CHEAPER MORE FRIABLE FRACTURED (ANDRADITE) GARNETS.

25KG  MEDIUM GRADE

30/60 MESH ( 600 - 250 MICRONS )

GENERAL PURPOSE, THIS IS THE MOST POPULAR GRADE, SUITABLE FOR ALL SURFACE PREP RUST AND COATING REMOVAL WORK, USE IN TANKS & CONFINED SPACES WHERE LOW DUST IS PARAMOUNT. GREAT FOR REMOVING MILL SCALE, AND FOR STAINLESS STEEL, AND SPECIAL ALLOYS.


BEST USED AT LOW PRESSURE TO ACHIEVE MAXIMUM IMPACT VELOCITY &  BEST CLEANING RATES .... 30 TO 40 PSI FOR DIRECT PRESSURE BLAST MACHINES.  60 TO 70 PSI FOR SUCTION BLAST MACHINES. WINDING UP THE PRESSURE WILL MERELY INCREASE FRICTIONAL HEAT & DUST.

WILL NORMALLY RECYCLE 2 OR 3 TIMES DEPENDING ON APPLICATION

POPULAR WITH INDUSTRIAL PAINTING CONTRACTORS, SHIP & MARINE REPAIRERS, BLAST ROOMS FOR HEAVY EQUIPMENT, PETRO-CHEMICAL, OFFSHORE, FABRICATORS, AND POWDER COATERS.

Write a review
Note: HTML is not translated!
Bad Good